When you finished the purchase and everything is ready. You need to prepare to pave it, this is the part of installation that requires patience and skill.
① Arrange the seams under the turf joints to align the seams of the turf and the centerline of the seam's fabric.
②
Roll up the adjacent turf side up 20cm uniformly, and evenly apply glue
on the back of the turf and the joint cloth below it with a brush and a
scraper. (Note here that the amount of glue used should be small so
that the adhesion is not strong enough. the amount is easy to overflow
and stick to the grass.)
③When the glue to be applied is not sticky,
press the rolled turf into the joint cloth by hand, so that the two
sides are as close as possible without gaps, and beaten with a rubber
hammer or with feet.
④ If the edge of the turf is connected to the wall, it needs not to be bonded. If the ground is connected, the glue on the back of the turf should be glued to the ground to prevent it from being kicked up.
Click here to learn more Aerificial Grass
