Specialized things are supposed to be done by professionals. There is no doubt a truth. But sometimes we may want to experience the fun of DIY, or we just wanna save money. So, Let's learn about how to build our own artificial turf field.
Step 1 Clean the foundation.
The
foundation of the lawn is required to have a good level of flatness and
remove debris. if there are conditions, it is better to have some
slight slopes or set drainage holes to avoid water accumulation.
Step 2 Turf admission.
The
finished synthetic lawn has two specifications. It is mostly 4 meters
or 2 meters wide, of course, if there are special demands, We JS
Artificial Grass can provide artificial turf carpet up to 5 meters wide.
And It is delivered via express in a form of rolls. After the grass
rolls arrive at the scene, they need to be spread out naturally for a
whole day so that the lawn can be naturally stretched and finished, and
the indentation folds that may be formed during transportation can be
stretched and smoothed; the direction of the straws must be consistent,
otherwise chromatic aberration will occur.
Step 3 Cutting the turf.
Lay
the fake turf according to the design drawings, make the adjacent turf
overlap as much as possible, or overlap the turf slightly by two or
three centimeters, use a utility knife to cut from the middle and cut
off the extra grass edge.
Step 4 Bonding the turf.
This step is a core of the whole installation. It depends on this step to decide whether your garden is beautiful or not. But in fact, it's not difficult, the only thing you need to do is to keep patiance. Click here to review details.
Step 5 Clean up the site.
After you finished the installation, it's not over yet. You have to clean up the scene.
Clean
up the debris on the turf and check the flatness of the site. If
wrinkles are found, use a utility knife to cut open the excess and
re-bond.
Click here to learn more Aerificial Grass
