Artificial turf must use special glue for artificial grass sports venues, joints should not exceed 2 mm.
The temperature should not be too low when the artificial lawn is laid and bonded, the ambient temperature should be chosen above 10 ℃ for construction; in addition, the artificial lawn laying should not be constructed in rainy days, otherwise, the adhesive time will be too long and even the non-stick will be caused.
The filling of quartz sand and rubber particles in artificial lawn laying is the most important link in the construction technology. Only when the material of artificial lawn surface layer is installed, the quartz sand and rubber particles can be filled after checking and leveling firmly to meet the requirements.
Specifications and quantities for filling in artificial lawn laying are determined according to the height and density of grass.
The need to pay attention to the laying of artificial turf, artificial turf laying must use special sand injection machines and brushing equipment to fill the granules, can guarantee the smoothness and uniformity of the artificial turf laying site, at the same time conducive to improve the sports performance of the site.
And quartz sand and rubber particles must be completely dry materials before construction, otherwise artificial lawn straw will be overwhelmed and affected filling quality.
In artificial lawn laying, quartz sand should be filled with multiple layers, and each layer should be filled with brush back and forth to fill the fill.
It is usually better to lay a lawn with a floor brushed more than twenty times back and forth.
