It is more difficult to repair artificial turf grounds than new artificial turf fields, but do you know what problems and things to be aware of during the renovation of used artificial turf fields?
The renovation of the artificial turf site requires the removal of the old artificial turf and the replacement of the new lawn. The first step is to dismantle the artificial turf, which is also the most critical part. In the process of dismantling artificial turf, we must first pay attention not to destroy (eliminate) the original artificial turf foundation. The artificial turf foundation is generally cement, asphalt, or other lime soil cushion. The artificial turf is bonded to the ground through adhesive during installation. Or on the seam belt and the non-woven fabric, in the process of removing the artificial turf, tools should be used to remove the artificial turf and the joint layer, and the artificial turf foundation cannot be destroyed.
In addition, the dismantled materials are all in tons, so we must fully consider the quotation process. When many novices go to the venue, the artificial turf at the site is close to being bald, thinking that there will be less garbage to be cleaned. This is not the case. Because the number of filled granules and quartz sand is basically the same when building a new artificial turf field, take a standard football field as an example. The quartz sand filled is about 200 tons, so this is a huge The garbage cleanup work, so it must be fully considered when making budgets.
The old quartz sand and rubber granules cleaned on artificial turf, these waste materials are absolutely unusable. After years of use, these old materials have long lost their inherent properties, and they are mixed with dust and other garbage. , no longer has security features.
Finally, before laying new artificial turf, be sure to clean the site first. If necessary, it is best to rinse it with water, clean up the dust on the site, and then start to lay new artificial turf.
