Among these uses, the wall installation construction process is the most challenging for two reasons. First, the construction takes a long time; the width of the lawn produced by the lawn manufacturer is 4 * 25 meters, and a roll of lawn 100 Square meters, but within an office area of 100 square meters, the conventional height of the wall is 3 or 4 meters, and some are even only one meter high, which requires engineers to cut large lawns into multiple pieces; second, one roll The weight of the lawn is 200kg. This weight is difficult to firmly fix the lawn to the wall with glue. To achieve the best state of artificial grass bonding, it can be installed by a professional construction and installation master.
Although it is difficult to construct, the advantages of installing lawns on the wall are undeniable. It gives customers a bright feeling and a label of innovation. The employees are proud and confident in working in such a beautiful company. The most important thing is It is used for more than ten years.
1. Auxiliary tools that need to be prepared before installing artificial turf: long ruler, wallpaper knife, special glue for artificial turf, brush, rubber hammer, dragon skeleton, electric drill, nails, etc.
2. Before the artificial turf construction connection process, the ground or wall surface to which the artificial turf is bonded must be cleaned and its surface kept dry and free of moisture. Before the artificial turf construction connection process, the ambient temperature must be selected above 5 ° C. Artificial turf construction is the best; spread the turf for 24 hours to release the turf tension, so that the turf paving effect is wrinkle-free and more beautiful.
3. Fix the dragon skeleton on the wall first. Hold the dragon skeleton close to the wall and draw a small circle with a brush at the place where nails are needed. Use a drill to drill the nails at the small circle to firmly fix the dragon skeleton on the wall.
4. According to the height of the wall, use a wallpaper knife to cut the lawn to the required size, and nail it on the dragon skeleton.
5. Curing during the specific construction of artificial turf: During the construction of artificial turf, the curing time is generally three days, and the final strength of the test is generally ten days. Attention should be paid to the maintenance of artificial turf during the curing of artificial turf construction.
The difference between the installation of the artificial turf wall and other installations is the need for a dragon skeleton to support it. This is also the most important link in the wall installation. Only in this way can the artificial turf be fixed more reliably.
