The construction process of artificial turf has been emphasized many times. It only needs to operate in the relevant order. Basically, no mistakes can be made. If the artificial turf is still found to be defective after the construction is completed, it may be that details are missing during the construction process of the artificial turf.
The entire artificial turf field is formed by assembling and splicing an artificial turf. When splicing, artificial turf special glue should be used. In this way, it can be bonded firmly and evenly, and almost no seam lines can be seen. If the joint line on the artificial turf field is obvious, the glue may be used improperly or the bonding quality may be unqualified.
The venue requirements for regular competitions are very strict. Even a marking line must be accurate and qualified. Therefore, the size of the artificial turf needs to be determined according to the requirements, and the error should be controlled within the allowable range; Otherwise, it will be re-constructed.
Artificial turf fillers can not be underestimated, and we must pay attention to distinguish whether the quality is good or bad, if the filler has quality problems, it is easy to cause artificial turf venues smell or fade, this site is obviously not meet the requirements.
As fillers for artificial turf, sand injection and rubber pellets must not only ensure excellent quality, but also spread evenly; and artificial turf must be treated in advance to prevent it from wrinkling, so as to avoid the occurrence of surface unevenness on the entire artificial turf field.
When laying, artificial grass turf grass should be arranged in a regular arrangement, otherwise there will be light reflection color difference. In addition, the strength of the joint belt must also be guaranteed. This is one of the conditions to avoid turning up the artificial turf.
