Fake grass, also known as artificial turf, is an excellent alternative to natural grass. It is durable, low-maintenance, and looks good all year round. However, to maintain the perfect look, it is essential to keep it in place. In this article, we will discuss some ways to keep your fake grass in place.
1. Securing the Borders
One of the easiest ways to keep your artificial turf in place is to secure its borders. You can use bender board, which is made of recycled plastic. It is flexible and easy to install, and it can easily be shaped to fit the curves of your lawn. You can also use landscape timber, which is more durable than bender board and can be treated to withstand rot and decay.
Once you have installed the borders, you can use spikes or nails to secure them into the ground. Make sure that you hammer the spikes at an angle and that they go through the border into the ground. This will prevent the border from curling up and will hold the fake grass in place.
2. Apply Sand Infill
A common way to keep artificial grass carpet in place is by applying sand infill. This is a process where you add a layer of sand on top of the fake grass and spread it evenly. This not only adds weight to the grass, which helps keep it in place, but it also helps to keep the fibers standing upright.
To apply the sand, you can use a drop spreader. This will enable you to spread the sand evenly. You will need to use a specific type of sand called silica sand, which is rounded and has no sharp edges. Once you have spread the sand evenly, use a broom to sweep the sand into the fibers. Keep doing this until the sand has worked its way down to the bottom of the fibers.
3. Install Shock Pads
Another way to keep your artificial grass turf in place is to install shock pads beneath it. Shock pads are made of rubber and are designed to absorb impact and provide cushioning. They are typically used in gyms and sports fields but can be used in your backyard as well.
To install the shock pads, you will need to dig a shallow trench and lay them inside. Make sure that they are level and cover the entire area. Once you have finished installing the shock pads, you can install the fake grass on top. The weight of the grass combined with the shock pads will keep it in place.
4. Use Adhesives
If you have small areas of artificial lawn that are prone to movement, you can use adhesives to keep them in place. You will need to use a two-part epoxy adhesive that is specifically designed for use on artificial turf. This adhesive is strong and durable and will keep the fake grass in place.
To apply the adhesive, you will need to clean the surface of the fake grass thoroughly. This will ensure that the adhesive sticks properly. Once the surface is clean, mix the two-part epoxy adhesive according to the manufacturer's instructions. Apply the adhesive to the area where the fake grass is moving and press it down firmly. Hold it in place until the adhesive dries.
5. Opt for Heavy Duty Installation
If you are looking for a more permanent solution to keeping your fake lawn in place, you can opt for a heavy-duty installation. This involves digging deep and preparing a firm, stable base for the fake grass to sit on. The base can be made of compacted aggregate, crushed rock, or a mix of both. This will ensure that the fake grass does not move and stays in place for years to come.
Conclusion
In conclusion, there are several ways to keep your synthetic grass in place. Whether you choose to secure the borders, apply sand infill, install shock pads, use adhesives, or opt for heavy-duty installation, the goal is to ensure that the grass stays in place. By following these tips, you can maintain the perfect look of your fake grass for years to come.
