First, after the artificial turf is unloaded, don't rush to shop. You need to spread all the lawns. If you have enough time, you should cool it for at least 24 hours. If you are in a hurry, you should also expose at least two under the sun. Hours, also pay attention when paving. Cooling will completely release the stress generated by the artificial turf during production and transportation, so that the artificial turf can adapt to the thermal expansion and contraction of the new environment, so as to avoid excessive seams after paving.
The second point, in the process of tailoring the artificial turf, do not ask for a cut, a little cut to prevent the lawn from being cut, resulting in excessive gaps.
Thirdly, when cutting artificial turf, it is easier to cut from the back, and the artificial turf is turned over when cutting.
Fourth, when brushing the glue, care should be taken not to stick the glue on the grass, otherwise the seam will be more obvious.
The fifth point, the connection belt and the cement do not need to be glued and glued together, while the glue is saved, the suspension state of the lawn is more favorable for drainage and release of displacement caused by thermal expansion and contraction during use.
In the sixth point, during the paving process, it is necessary to ensure that the grasses in the whole site are in the same direction, otherwise it will cause visual chromatic aberration.
