With the increasing popularity of artificial turf, the use of three-dimensional walls for artificial turf is becoming more and more common. This is a much harder task than laying artificial turf in football fields and kindergartens. The main difficulty is that it takes a long time for construction, and there is the problem of fixed artificial turf on the wall.
At present, the turf width of domestic large-scale artificial turf manufacturers is 4 meters, and a roll of lawn is 100 meters. However, the general height of conventional walls is 3-4 meters, and some are even shorter. At this time, the artificial turf needs to be cut into pieces before it can be put into place. This will take a lot of time.
Second, a square artificial turf is about two kilograms in weight. It is difficult to fix it to the wall with glue. Although there are difficulties in construction, there are still many reasons why users choose artificial turf on the wall. It can be seen that its advantages are obvious to all.
If the artificial turf is installed on a three-dimensional wall, first the tools and materials must be prepared, including a long ruler, a wallpaper knife, a special glue for artificial turf, a brush, a rubber mallet, a dragon skeleton, an electric drill, a nail, and so on.
Before joining the artificial turf, the bonded wall must be cleaned and its surface should be dry and free of moisture. Then fix the skeleton of the dragon to the wall. The method is that the skeleton of the dragon clings to the wall with a brush to draw a small circle at the place where the nail is to be nailed, and drill nails in this position to fix it.
All that needs to be done is to cut the artificial turf into the required size with a utility knife according to the height of the wall. After the completion, nail the lawn to the dragon skeleton and do not forget to apply glue on the corner of the lawn to avoid cracking.
It should be noted that during the brushing process of the artificial turf, the curing time should be controlled. During the general period of 10-30 minutes after the gluing, the paste should be affixed when it reaches 80% dry. During construction bonding, one-time alignment is required for adhesion, and the bonded object must not be moved after bonding.
After a certain period of time, the process of installing the artificial turf wall after curing and testing is basically completed. It can be seen that the dragon skeleton as a support is the key link for the artificial turf to achieve the wall installation. Only in this way can the artificial turf be more assured.
