In the process of artificial turf application, we often see the problem of lawn hair loss produced by some small manufacturers. The whole root lint is a problem with the pulling force of the lawn.
There are two main reasons that affect the pull-out force of artificial turf. The first is the production process, which is mainly the weaving process.
The weaving process will directly affect the pull-out force of artificial turf and the problem of grass weeding. At present, the weaving process at home and abroad is very similar. As long as it is the quality of the bottom cloth, there will not be a large area of bottom cracking in the weaving process. The problems are generally solved during the manufacture of adhesives.
After the artificial turf weaving is completed, it enters the back-gluing process. The back glue is the final process of the artificial turf. The reason why the pull-out force is small and the grass is off occurs. The big reason is that there is a problem with back glue. If there is a problem in the back glue, The adhesive is uneven, and there is a clear thickness after drying. In areas with severe exposed grass, there will be problems with grass in the future. In addition, the quality of the adhesive will also affect the pull-out force problem.
After the completion of the artificial turf paving, once there is a problem of low pullout force and serious graze, the later processing is very troublesome. The large area of the grass will even need to be completely scrapped and re-paved, so the pullout force is a measure of man-made power. The most important turf quality.
