Artificial turf does not have high requirements on the ground. Whether it is cement concrete, asphalt concrete, hard sand ground, or cement-stabilized layer, artificial turf can be laid. The important thing is that artificial turf is very simple to maintain in the later stage and durable.
The most important thing for laying artificial turf is to make a construction plan and then start from the corner of one side according to the order of the construction drawings. The fixing method of laying artificial turf ground is to use glue, so how to fix the fake turf to the wall? The artificial turf is pasted to the wall enclosure by screw reinforcement. Let's learn more about it together.
How to lay the artificial turf
1. Area of construction drawing: first measure the area of lawn to be laid, and the price per inch. It is best to make a detailed construction area drawing. The same area is placed on the drawing, and the algorithms for some edges and corners may be different. With the construction drawing area, the calculation will be more accurate.
2. The color of the lawn: the lawns are all green, and there are many kinds of green lawns, including light green and dark green. And the color green will become lighter after how long it is used. These must be taken into account in the budget. It can't be changed soon. It is a waste of money.
3. The type of lawn: Determine the type of lawn, and the type of green grass is divided into very fine and thick. Green grass vertical, sloping, etc. Do not decide solely on personal preference, but choose the model according to the actual needs of lawn use.
4. The quality of the lawn: The quality of the lawn is the key. As mentioned above, the lawn is always falling off and sticking to the clothes. It is because the quality of the lawn is not good. When the inferior lawn rolls on it, this situation will occur.
5. Acceptance of all auxiliary materials: there are also some auxiliary materials and tools such as glue and viscose for sticking to the lawn. After everything is ready, the most detailed acceptance work is required to ensure that every link and every rot is of high quality and flawless, because lawn rework is a big project and must be meticulous.
6. Start laying the lawn: The best procedure is to start laying the lawn, don't spread it randomly, follow the construction drawings, in order, start from the corner of one side, and spread out along the way. Do not use the paved lawn immediately, and wait until it completely adheres. When using it later, you should always ask a professional to take care of it.
How to fix the fake lawn to the wall
1. Auxiliary tools that need to be prepared before installation: long ruler, wallpaper knife, special glue for artificial turf, brush, rubber hammer, dragon skeleton, electric drill, sub, etc.
2. Before the artificial turf construction and connection process, it is necessary to clean the ground or wall to which the artificial turf is bonded, and keep the surface dry and free of moisture. Before the artificial turf construction and connection process, it is necessary to select an ambient temperature above 5°C It is the most suitable artificial turf construction; spread the lawn for 24 hours to release the lawn tension, so that the lawn paving effect is wrinkle-free and more beautiful.
3. Fix the dragon skeleton to the wall first. Attach the dragon skeleton to the wall and draw a small circle where the nails need to be nailed with a paintbrush. Use an electric drill to drill the nails at the small circle to fix the dragon skeleton firmly on the wall.
4. According to the height of the wall, use a wallpaper knife to cut the lawn into the required size, nail it to the dragon skeleton, and brush the corner edges of the lawn with glue to avoid cracking. The drying time should be controlled during the artificial turf brushing process. Generally, within 10-30 minutes after gluing, the glue reaches 80% to 90% dry and is not sticky to the touch. Artificial turf construction and bonding requires one-time alignment and bonding, and must not move the bonded object after bonding.
5. Solidification in the specific construction process of artificial turf: During the construction of artificial turf, the curing time is generally three days, and the final strength of the test is generally ten days. During the construction and curing of artificial turf, attention should be paid to the maintenance of artificial turf, and the artificial turf should avoid water immersion and movement so that the artificial turf can be in the best state of bonding.
The difference between the artificial turf wall installation and other installations is that the dragon skeleton is required for support, which is also the most important part of the wall installation. Only in this way can the lawn be more firmly fixed.
