1. The phenomenon of artificial bulging has caused a variety of reasons, such as: drying of the base fabric, rolling of the lawn, and curling of the straw, etc. Many lawn manufacturers do not adjust in time according to the grass fiber and tuft density of the straw. The bottom cloth causes bulging after the construction of the artificial turf. According to many years of production experience, the corresponding adjustment measures are summarized. It is suggested that the use of 165 g of base cloth plus grid cloth or double 120 g base cloth is recommended to avoid bulging or lawn cracking caused by this link.
2, glue drying This is also a lot of non-standard lawn manufacturers often encounter headaches, mainly there is no system, workers adjust the speed caused by too fast, SBR water has not yet fully distributed on the reel, once opened the lawn The phenomenon of thermal expansion and contraction occurs, forming a block bulge, resulting in paving staff can only open knife or glue to make up for bulging phenomenon, greatly affecting the overall appearance of the lawn.
3. The winding is actually a glueing link. The winding of the artificial turf is the final production link. Many operators do not understand the concept of winding, and think that the tightness is good. In fact, the size of the rolling is based on the height of the grass. Density It was decided that this would take a long time to grope for the sake of summing up which kind of grass had a poor speed, otherwise he would have a hesitation.
4, bulging phenomenon In fact, grass is also a great relationship, the curvature of grass if the curvature does not match the same will appear bulge, because the winding grass is not in the same level, but there will be wrinkled.
